P1300 parameter can be modified in C(1), T state, ie P10=1, or T: Ready to run pulse is not enabled and state "C(1)" is inactive. .
After setting P1300=20, P1900 is automatically set to 2. After quick commissioning, the inverter will display alarm A07991, prompting to activate motor data identification and wait for start command.
Siemens inverter repair
Siemens inverter repair center
SIEMENS/Siemens Inverter Repair Center/Maintenance Service: 24H Service Hotline: 15800462088
Siemens inverter repair center, provide home maintenance inspection and repair services: 24H service hotline: 15800462088
